Technical Info

  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Silicone-free lubricant on all seals
  • Chrome plated brass ball for longer life
  • 100% full port for maximum flow
  • Hot forged sand blasted, nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Integrated ISO 5211 and DIN 3337 mounting flange for universal connection to actuator
  • Finest brass according to EN 12165 and EN 12164 specifications
  • Integrated sturdy ISO 5211 flange allows direct mounting of electric and pneumatic actuators, with no bracket or coupling required. See RuB line of electric and pneumatic actuators.
  • Blowout-proof nickel plated brass stem
  • Maintenance-free, double FPM O-rings at the stem for maximum safety
  • 40 bar (600 PSI) up to 2″, 30 bar (450 PSI) over 2″ non-shock cold working pressure
  • For use with dangerous fluids pressure rating is 5 bar
  • -20°C to +170°C (-4°F to +350°F)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • For use with dangerous fluids temperature rating is -20°C +60°C
  • Reinforced PTFE self- lubricating seats with flexible-lip and wear compensation design
  • s.64 configuration featuring NPT taper ANSI B.1.20.1 female by female threads, unplated body, reinforced seats and brass or stainless stem and ball
  • CW511L brass (lead-free and DZR) for drinking water applications with compression ends
  • Configuration for use with slurries or liquid bearing abrasive particles
  • Rack and pinion pneumatic actuator (spring return or double acting)
  • Compact power electric actuator for some sizes
  • Manual lockable handle
  • EN 10226-1, ISO 228 parallel female by female threads
  • Custom design
  • Assessment according to Pressure Equipment Directive 2014/68/UE module B+D by ICIM (0425)
  • Water Regulations Advisory Scheme (United Kingdom)
  • GOST-R (Russia)
  • EAC – Declaration of conformity (Russia, Kazakhstan, Belarus)
  • RoHS Compliant (EU)

NOTE: approvals apply to specific configurations/sizes only.

Valves configuration up to 2”

Part description Quantity Part Material
Unplated body
1
CW617N
Unplated retainer nut
1
CW617N
Retainer seat
1
PTFE
Chrome plated ball
1
CW617N
Body seat
1
PTFE
Unplated stem O-Ring design
1
CW617N
O-Ring
2
FPM
O-Ring
2
FPM
Black anodized flange (only from 2.1/2" to 4")
1
Aluminum
Grub Screw (only from 2.1/2" to 4")
2
CB4FF

Valve ball seats and stem configuration of valves over 2” is different.

Ball valves are marked CE on end-cap from 1.1/4’’ to 4’’ as follow: CE 0425 cat IIIB+D PS: 5 GAS TS1:-20°C TS2:+60°C

Torque for actuator sizing N.m
Torque correction factors

Valve torque can vary according to operating frequency, temperature and friction characteristics of the media. If media has more or less friction than water, multiply torque by the following factors.

Lubricating oils or liquids 0.8
Dry gases, natural gas 1.5
Slurries or liquids bearing abrasive particles 1.5÷2.5
Pressure-temperature chart
Pressure drop chart

Technical material

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.

XCES6400
-
4266

To view all available technical material
Register as a client

Suggested for you
ball valves s71 npt
Ball valves

s.71 NPT

1/2" - 4" standard port

s.71 NPT
Thread
NPT ANSI B1.20.1
Pressure
40 bar / 600 PSI
Size
1/2"
3/4"
1"
1.1/4"
1.1/2"
2"
2.1/2"
3"
4"
Ends
Female threads
Material
Brass unplated
Port Type
US standard
Operating system
Lever
Stainless Steel Lever
Lockable Lever
Oval lockable
T-handle
Stubby
Temperature min
-40 °C / -40 °F
Temperature max
+185 °C / 366 °F
View
ball valves s515 kfe
Ball valves

s.55 KFE

1/4" ISO 228, cap & strap

s.55 KFE
Thread
BSP-Parallel ISO 228
Pressure
40 bar / 600 PSI
Size
1/4"
Ends
Male threads
Material
Brass unplated
Port Type
Full
Special configuration
Cap & strap
Operating system
Screwdriver
Wrench
Wedge
Temperature min
-20 °C / -4 °F
Temperature max
+90 °C / 194 °F
View
ball valves s51
Ball valves

s.51

1/2" - 2" EN 10226-1, standard port

s.51
Thread
BSP-Parallel EN 10226-1, ISO 228
Pressure
30 bar / 450 PSI
Size
1/2"
3/4"
1"
1.1/4"
1.1/2"
2"
Ends
Female threads
Male by Female
Material
Brass nickel plated
Port Type
EU nominal/standard
Operating system
Lever
Stainless Steel Lever
Lockable Lever
Oval lockable
T-handle
Stubby
Temperature min
-40 °C / -40 °F
Temperature max
+170 °C / 350 °F
View
ball valves s42
Ball valves

s.42

1/2" - 3" solder-ends ball valve

s.42
Pressure
40 bar / 600 PSI
Size
1/2"
3/4"
1"
1.1/4"
1.1/2"
2"
2.1/2"
3"
Ends
Solder Ends
Material
Brass unplated
Port Type
Full
Operating system
Lever
Lockable Lever
Oval lockable
T-handle
Stubby
Temperature min
-20 °C / -4 °F
Temperature max
+170 °C / 350 °F
View