• 24h 100% seal test guaranteed
• Dual sealing system allows valve to be operated in either direction making installation easier
• No metal-to-metal moving parts
• Handle clearly shows ball position
• Silicone-free lubricant on all seals
• Chrome plated brass ball for longer life
• Handle stops on body to avoid stress at stem

• Full port to DIN 3357 for maximum flow

• Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
• Finest brass according to EN 12165 and EN 12164 specifications

• Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
• WARNING: do not exceed reasonable temperature and/or electrical load

• Blowout-proof nickel plated brass stem
• Pure PTFE adjustable packing gland and reinforced washer for lower torque and easy maintenance

• 600 PSI (40 bar) up to 2″, 450 PSI (30 bar) over 2″, (150 WSP / -10 bar all sizes) non-shock cold working pressure
• NOTE: for solder joints ratings see Table 1 on reverse
• 250 PSI (17 bar) non-shock working pressure for LP-Gas
• *150 psig (10 bar)  non-shock working steam pressure. Not suitable for throttling steam.
• -4°F to +366°F (-20°C to + 170 °C)  (for solder joints ratings see Table 1 on reverse)
• WARNING: freezing of the fluid in the installation may severely damage the valve

• Pure PTFE self-lubricating seats with flexible-lip design

• Stem extension (assemble after soldering)
• Lead free for safe drinking water (0.25% or less Pb)
• Oval lockable handle up to 2″, round over 2″
• Patented locking device for valves up to 3″
• T-handle
• Stubby handle

• Solder end female by female connections

• Stainless steel ball and/or stem (1.4401 / AISI 316)
• Glass filled PTFE seals
• Stainless steel handle (1.4016 / AISI 430)
• Custom design

GOST-R (Russia) RoHS Compliant (EU) Underwriters Laboratories (United States, Canada): – Guide YSDT: LP-Gas shut-off valve – Guide YRBX: Flammable liquid shut-off valve – Guide YRPV: Gas shut-off valve for use with natural and manufactured gases – Guide MHKZ: No. 6 oil at 250°F Meeting WW-V-35C Federal U.S. Specification (United States) CRN-TSSA acc. to MSS SP110 (Canada) NOTE: approvals apply to specific configurations/sizes only.