• No metal-to-metal moving parts
• No maintenance ever required
• Handle clearly shows ball position
• Silicone-free lubricant on all seals
• Chrome plated brass ball for longer life
• Each valve is seal tested for maximum safety
• Double seal system

• Full port for maximum flow

• Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
• Finest brass according to EN 12165 and EN 12164 specifications

• Reinforced nylon black wedge handle removable with valve in service

• Blowout-proof brass stem with EPDM O-ring
• Maintenance- free, double EPDM O-ring at the stem for maximum safety

• 40 bar (600 PSI) non-shock cold working pressure
• -20°C to +90°C (-4°F to +200°F)
• +120°C screw driver and wrench operated version
• WARNING: freezing of the fluid in the installation may severely damage the valve

• Pure PTFE self-lubricating seats with flexible-lip design

• Screw driver or wrench operated
• Nylon wedge handle yellow, red or green
• Grey wedge handle in Grivory® – high performing polymer
• 1/4″ NPT taper ANSI B.1.20.1 male thread by 3/4″NH  hose thread
• Hose holder for connection of waste water collection pipe
• Seal washer on 1/4″ ISO 228 parallel male thread
• Additional connection options on demand

• 1/4″ ISO 228 parallel male thread by 3/4″ ISO 228 thread closed by cap

• GOST-R (Russia)
• EAC – Declaration of conformity (Russia, Kazakhstan, Belarus)
• RoHS Compliant (EU)

  NOTE: approvals apply to specific configurations/sizes only.