EAC- Declaration of conformity
Select the certification file for download
Document
Document
Permetti download anche all'utente anonimo
Off
Technical Info
- Suitable for domestic, industrial, pneumatic and hydraulic installations
- Valve will perform its duty no matter if installed horizontally, vertically or half way
- Strong configuration
- Hot forged brass body
- Stainless steel filter
- Filtration degree 2400 μm
- 10 bar up to 1″, 8 bar from 1.1/4″ to 2″, 6 bar over 2″ non-shock cold working pressure
- 0°C to +90°C (+32°F to +194°F)
- WARNING: freezing of the fluid in the installation may severely damage the valve
- Soft seat for positive shut-off
- ISO 228 female parallel thread
- The product described in this document meets the requirements of PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking; it cannot be used with dangerous gases in sizes larger than 25mm
- EAC – Declaration of conformity (Russia, Kazakhstan, Belarus)
NOTE: approvals apply to specific configurations/sizes only.
| Part description | Quantity | Part Material |
|---|---|---|
|
Body
|
1
|
CW617N
|
|
Seat
|
1
|
CW617N
|
|
Seal
|
1
|
NBR
|
|
Gasket
|
1
|
Fibre
|
|
Retainer
|
1
|
CW617N
|
|
Strainer
|
1
|
AISI304 (1.4301)
|
Technical material
Document
Permetti download anche all'utente anonimo
Off
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCE124
-
5813
To view all available technical material
Register as a client