This newly engineered valve features all the good
characteristics of the s.31 RuB mini valve, in particular:

Technical Info

  • 100% seal test guaranteed in according to EN12266-1 RATE A in either direction
  • Compatible with most industrial fluids including those too viscous for pilot operated valves
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Silicone-free lubricant
  • Chrome plated ball for longer life
  • Can operate also in vacuum line
  • EN 10226-1, ISO 228 parallel female by female threads
  • Finest brass according to EN 12165 and EN 12164 specifications
  • Strong one piece body construction
  • Blowout-proof nickel plated brass stem
  • Maintenance-free, double FPM O-rings at the stem for maximum safety
  • Shell rating: 40 bar non-shock cold working pressure
  • Seat rating: Delta P max permissible 16 bar
  • -20°C to +120°C (-4°F to +250°F)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • Pure PTFE self-lubricating seats
  • ISO 7/1, BS 21 BSPT taper threads
  • NPT taper ANSI B.1.20.1 threads
  • The product meets the requirements of PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking
  • EAC – Declaration of conformity (Russia, Kazakhstan, Belarus)
  • RoHS Compliant (EU)

NOTE: approvals apply to specific configurations/sizes only.

Part description Quantity Part Material
Nickel plated body (external treatment)
1
CW617N
Seat
2
PTFE
Chrome plated ball with rinse hole (rinse hole on sizes from 3/4” up to 1 1/4”)
1
CW617N
Nickel plated end-cap (external treatment)
1
CW617N
Washer
1
PTFE carbon filled 25%
Nickel plated stem O-ring design
1
CW617N
O-Ring
2
FPM
Torque for actuator sizing N.m
Torque correction factors

Valve torque can vary according to operating frequency, temperature and friction characteristics of the media. If media has more or less friction than water, multiply torque by the following factors.

Lubricating oils or liquids 0.8
Dry gases, natural gas 1.5
Slurries or liquids bearing abrasive particles 1.5÷2.5
Pressure-temperature chart
Pressure drop chart

Technical material

Document

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.

XCES31
-
0

To view all available technical material
Register as a client