The CP series Electric actuator provide an output torque of 8 Nm and it is available in AC and DC voltage. 
Compact package to fit in restricted spaces. The CP series has an ISO 5211 mounting interface for direct assembly.



Complete datasheet in download section.

Technical Info

• Torque output up to 8 Nm (71 in-lb) 
• Suitable for actuatable valves 
(RuB valves up to 1 ¼” size; only for s.64 LT and s.65) 
• Standard power cable lenght: 0,8 m (31”)
• 2 Micro-switches for open-close signals: 
        - Standard: motor-voltage switches
        - Optional: free-auxiliary switches
• Micro-switches can pass up to 1A 
• Bidirectional motor 
• DC brushless motor 
• Over 100.000 cycle life tests made
• Duty cycle 60%
• Direct mount on valve for perfect shaft alignment 
• Positive orientation between ball valve and actuator 
• Actuator easily removable for manual operating by screwdriver (s.31) 
• Visual position indicator 
• Corrosion resistant PC plastic housing 
• The gearbox structure is made of steel

  • 220-240V AC 50/60Hz
  • 110-120V AC 50/60Hz; 
  • 24V AC 50-60Hz; 
  • 24V DC / AC 50-60Hz; 
  • 3.5÷12 V DC; 12 V DC; 24V DC; 
  • Motor power consumption only during operation: 

         - DC and DC/AC: 5.5W;
         - AC: 8W 

  • Operation time (90°): 

    - DC and DC/AC: 3 sec;
    - AC 50Hz: 20 sec;
    - AC 60Hz: 15 sec
  • Working temperature -20°C (-4°F) to +80°C (+180°F)*

*UL approval up to +70°C (+160°F)

  • UL-listed Class XABE
  • IEC/CE:
    - Low voltage directive (LVD) 2014/35/EU 
    - Electromagnetic Compatibility Directive (EMCD) 2014/30/EU
    - IEC/EN 60730-1 Automatic electrical controls for household 
    and similar use - Part 1: General requirements
    - IEC/EN 60730-2-14 Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators
  • IEC 60529: IP65 degrees 
  • ANSI/NEMA 250: Enclosures for Electrical Equipment NEMA 4X
  • IEC/EN 60730-1: IEC Electric Protection Class
    - 110VAC e 220VAC: Class 2 (II) 
    - Other voltage: Class 3 (III) 

Dimensions mm - Flange ISO 5211 F03

Dimensions mm - for s.31

How to order

Technical material


Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.


To view all available technical material
Register as a client