Technical Info

  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • Handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Chrome plated brass solid ball for longer life
  • Handle stops on body to avoid stress at stem
  • Full port to DIN 3357 for maximum flow
  • Solid ball for optimum CV
  • Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Finest brass according to EN 12165 and EN 12164 specifications
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • Blowout-proof nickel plated brass stem
  • Pure PTFE adjustable packing gland and reinforced washer for lower torque and easy maintenance
  • Triple stem seals in sizes over 2″
  • 600 PSI (40 bar) up to 2″, 450 PSI (30 bar) over 2″, (150 WSP / -10 bar  all sizes) non-shock cold working pressure
  • 250 PSI (17 bar) non-shock working pressure for LP-Gas
  • *150 psig (10 bar) non-shock steam working pressure. Not suitable for throttling steam
  • -40°F to+366°F (-40°C to +185°C)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • Glass filled pure PTFE self-lubricating seats with flexible-lip design
  • Stem extension
  • T-handle
  • Stainless steel handle (1.4016 / AISI 430)
  • Oval lockable handle up to 2″, round over 2″
  • Patented locking device for valves up to 4″
  • Male by female NPT threads up to 4″
  • Stubby handle
  • NPT taper ANSI B. 1.20.1 female by female threads
  • Stainless steel ball and/or stem (1.4401 / AISI 316)
  • Custom design
  • Pure PTFE seals
  • Canadian standards Association (United States, Canada)
  • Factory Mutual (United States)
  • GOST-R (Russia)
  • RoHS Compliant (EU)
  • Underwriters Laboratories (United States, Canada): – Guide YSDT: LP-Gas shut-off valve – Guide YRBX: Flammable liquid shut-off valve – Guide YRPV: Gas shut-off valve for use with natural and manufactured gases – Guide MHKZ: No. 6 oil at 250°F
  • Meeting WW-V-35C Federal U.S. Specification (United States)
  • CRN-TSSA  acc. to MSS SP110 (Canada)
  • Kuwait Fire Service Directorate (Kuwait)

NOTE: approvals apply to specific configurations/sizes only.

Part description Quantity Part Material
Unplated NPT body
1
CW617N
Seat
2
PTFE glass filled 5-15%
Chrome plated solid ball
1
CW617N
Unplated NPT end-cap
1
CW617N
Nickel plated stem packing gland design
1
CW617N
Nickel plated gland nut
1
CW617N
Geomet® nut
1
CB4FF (EN10263-2)
Packing gland seal
1
PTFE
Washer
1
PTFE carbon filled 25%
Yellow PVC coated Geomet® steel handle
1
DD11 (EN10111)

DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4. Stem configuration of valves over 2” is slightly different.

Pressure-temperature chart
Pressure drop chart

Technical material

Document
Document

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.

XCES92S
-
4711

To view all available technical material
Register as a client