Document
Permetti download anche all'utente anonimo
Off
Request info

Technical Info

  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Chrome plated brass ball for longer life
  • Handle stops on body to avoid stress at stem
  • One size reduced port compact design
  • Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Finest brass according to EN 12165 and EN 12164 specifications
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • Handle removable with valve in service
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • Blowout-proof nickel plated brass stem
  • Maintenance- free, double FPM O-rings at the stem for maximum safety
  • 40 bar (600 PSI) non-shock cold working pressure
  • -40°C to +170°C (-40°F to +350°F)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • Pure PTFE self-lubricating seats with flexible-lip design
  • NPT taper ANSI B.1.20.1 threads (s. 71 model with packing gland seal)
  • Stem extension
  • T-handle
  • Oval lockable handle
  • Stainless steel handle (1.4016 / AISI 430)
  • Patented locking device
  • Stubby handle
  • RuB memory stop designed to be installed with our stubby handle
  • ISO 7/1, BS 21 BSPT taper female by female threads
  • Stainless steel ball (1.4401 / AISI 316)
  • Glass filled PTFE seals
  • Custom Design
  • Male by female threads
  • According to 2014/68/UE module A: it cannot be used with dangerous gases in sizes larger than 25 mm
  • GOST-R (Russia)
  • RoHS Compliant (EU)

NOTE: approvals apply to specific configurations/sizes only

1.1/2”- 2” hollow ball

Part description Quantity Part Material
Unplated body
1
CW617N
Seat
2
PTFE
Chrome plated ball
1
CW617N
Unplated end-cup
1
CW617N
Nickel plated stem O-ring design
1
CW617N
Geomet® nut
1
CB4FF (EN10263-2)
O-ring
2
FPM
Red PVC coated Geomet® steel handle
1
DD11 (EN10111)

DN shows the nominal flow diameter. Ball valves are marked CE on handle from 1.1/2” to 2”as follow:

CE XXCODEXX Cat. I-A

Pressure-temperature chart
Pressure drop chart

Technical material

Document
Permetti download anche all'utente anonimo
Off

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.

XCES8850
-
4266

To view all available technical material
Register as a client