The RuB s.7641 is the right choice for fluid diversion and is designed with robust maintenance-free components ensuring ease of operation and safety. With a simple 90° turn, you can divert flow from one downstream outlet to the other. It combines traditional manual operation with modern automation. It is also very easy to convert from its sturdy lever handle to ISO 5211 actuator flange assembly. It features low operating torque and a special wear reducing self-compensating valve seat design that meets our 100,000 cycle life test requirement. The valve can be purchased separately, with handle or with a RuB actuator already mounted.

Technical Info

  • Electronic 100% seal test guaranteed
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Silicone-free lubricant on all seals
  • Chrome plated brass ball for longer life
  • Each valve is seal tested for maximum safety
  • Performs well in any orientation
  • Strong configuration

•   100% full port for maximum flow

  • Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Integrated ISO5211 / DIN3337 mounting flange for universal connection to actuator
  • Finest brass according to EN 12165 and EN 12164 specifications
  • 3-way L- port design for flow diversion
  •  Integrated sturdy ISO 5211 flange allows direct mounting of actuators. See RuB line of electric and pneumatic actuators.
  • Blowout-proof nickel plated brass stem
  • Maintenance-free, double FPM O-rings at the stem for maximum safety
  • Stem slot shows ball position
  • 450 PSI non-shock cold working pressure
  • -4°F to +302°F
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • Reinforced PTFE self- lubricating seats with flexible-lip and wear compensation design
  • Rack and pinion pneumatic actuator (spring return or double acting)
  • Compact Power electric actuator
  • EN10226-1/ISO228 parallel female threads
  • Lockable handle as accessory or already mounted (s.7641L)
  • Various actuator linkage kit
  • NPT taper ANSI B.1.20.1 female threads
  • Custom design
  • Stainless steel stem
  • Configurations with 4 seats, T-port (s.7341)
  • RoHS Compliant (EU)

NOTE: approvals apply to specific configurations/sizes only.

Part description Quantity Part Material
Sand blasted unplated body
1
CW617N
Seat
2
PTFE graphite filled 15%
O-Ring
2
FPM
Chrome plated ball
1
CW617N
Sand blasted unplated end-cap
1
CW617N
Washer
1
PTFE carbon filled 25%
Nickel plated stem O-ring design
1
CW617N
O-Ring
2
FPM
Torque correction factors

Valve torque can vary according to operating frequency, temperature and friction characteristics of the media. If media has more or less friction than water, multiply torque by the following factors.

Lubricating oils or liquids 0.8
Dry gases, natural gas 1.5
Slurries or liquids bearing abrasive particles 1.5÷2.5

Technical material

Document

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.

XCES7641
-
4821

To view all available technical material
Register as a client