-

HIGH TEMPERATURE RESISTANCE
Now approved for HTB use (Hochtemperaturbeständigkeit)
Class B 0,1 (0,1 bar @650°C for at least 30 minutes).

H2 READY
product approved in EU acc.to EN331 (sizes ¼” to 2”) for the 1st, 2nd and 3rd gas families, therefore compatible with hydrogen use up to 50% in the gas mixture, as established in the 1st gas family of the EN437 (ref. G110)

Technical sheet

Permetti download anche all'utente anonimo

Off

Request info

Technical Info

24h 100% seal test guaranteed
Dual sealing system allows valve to be operated in either direction making installation easier
No metal-to-metal moving parts
No maintenance ever required
Handle clearly shows ball position
Silicone-free lubricant on all seals
Handle stops on body to avoid stress at stem
Chrome plated brass ball for longer life with rinse hole

Full port to DIN 3357 for maximum flow

Valve length according to DIN 16722 M3 for sizes from 3/8” to 2” (DN10 to DN50). Size 1/4” (DN 8) complies to DIN 3202 M3.
Finest brass according to EN 12165 and EN 12164 specifications
Hot forged sand blasted external nickel plated brass body and cap sealed with Loctite® or equivalent threads sealant

Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
WARNING: do not exceed reasonable temperature and/or electrical load
Handle removable with valve in service

Blowout-proof nickel plated brass stem
Maintenance-free, double FPM O-rings at the stem for maximum safety

40 bar (600 PSI) non-shock cold working pressure
-40°C to +170°C (-40°F to +350°F)
For use with dangerous fluids temperature rating is -20°C to +60°C (-4°F to +140°F) and pressure rating is 5 bar (72 PSI) / HTB Class B 0,1
WARNING: freezing of the fluid in the installation may severely damage the valve

Pure PTFE self-lubricating seats with flexible-lip design

Stem extension
T-handle
Oval lockable handle
Stainless steel handle (1.4016 / AISI 430)
Patented locking device
Stubby handle
RuB memory stop designed to be installed with our stubby handle

EN 10226-1, ISO 7/1, ISO 228 parallel female by female threads

Stainless steel ball (1.4401 / AISI 316)
Glass filled PTFE seals
Custom design

Assessment according to Pressure Equipment Directive 2014/68/UE module B+D by ICIM (0425)

DIN-DVGW (Germany) – MOP 5 B 0,1
SVGW (Switzerland)
EAC – Declaration of conformity (Russia, Kazakhstan, Belarus)
BSI Group (United Kingdom)
RoHS Compliant (EU)

NOTE: approvals apply to specific configurations/sizes only.

1.1/4”- 2” hollow ball

Part description	Quantity	Part Material
Nickel plated body (external treatment)	1	CW617N
Ball seat	2	PTFE
Chrome plated ball with rinse hole (read rinse hole on sizes from 3/4" up to 2")	1	CW617N
Nickel plated end-cap (external treatment)	1	CW617N
Nickel plated stem O-ring design	1	CW617N
Geomet® nut	1	CB4FF (EN10263-2)
O-Ring	2	FPM
Yellow PVC coated Geomet® steel handle	1	DD11 (EN10111)

DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4. Ball valves are marked CE on handle from 1.1/4″ to 2″ as follow: CE 0425 cat IIIB+D PS: 5 GAS TS1:-20°C TS2:+60°C