• 24h 100% seal test guaranteed
• Dual sealing system allows valve to be operated in either direction making installation easier
• No metal-to-metal moving parts
• No maintenance ever required
• T-handle clearly shows ball position
• Silicone-free lubricant on all seals
• Chrome plated brass ball for longer life
• Handle stops on body to avoid stress at stem

• Full port to DIN 3357 for maximum flow

• Hot forged sand blasted, external nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
• Finest brass according to EN 12165 and EN 12164 specifications

• Aluminum T-handle up to 1″, Geomet® carbon steel T-handle with thick PVC  dip coating over 1″
• Handle removable with valve in service

• Blowout-proof nickel plated brass stem
• Maintenance-free, double FPM O-rings at the stem for maximum safety

• 40 bar (600 PSI)  non-shock cold working pressure
• -40°C to +150°C (-40°F to +302°F)
• WARNING: freezing of the fluid in the installation may severely damage the valve

• Stem extension
• Oval lockable handle
• Stainless steel handle (1.4016 / AISI 430)
• Patented locking device
• Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
• Stubby handle
• RuB memory stop is designed to be installed with our stubby handle

• ISO 228 female by union male threads

• Stainless steel ball (1.4401 / AISI 316)
• Glass filled PTFE seals
• Custom design

• According to 2014/68/UE module A: it cannot be used with dangerous gases in sizes larger than 25mm

• EAC – Declaration of conformity (Russia, Kazakhstan, Belarus)
• RoHS Compliant (EU)

NOTE: approvals apply to specific configurations/sizes only.