-

Legionella is a bacterium that lives and proliferates in natural and artificial aquatic environments at temperatures ranging between 5.7°C and 55°C and standing up to acidic and alkaline environments.
New s.84AW is approved for use with drinking water; the specific ball design avoids water stagnation and the spread of bacteria in the system.

Technical sheet

Request info

Technical Info

24h 100% seal test guaranteed
Dual sealing system allows valve to be operated in either direction making installation easier
The valve is provided with a flat sealing surface at male thread that offers an improved performance compared to conventional connections; a wider seal surface guarantees higher sealing, reliable over time
No metal-to-metal moving parts
No maintenance ever required
T-handle clearly shows ball position
Silicone-free lubricant on all seals
Handle stops on body to avoid stress at stem
Chrome plated brass ball with rinse hole

Full port to DIN 3357 for maximum flow

Hot forged sand blasted, external nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
Finest brass according to EN 12165 and EN 12164 specifications

Aluminum T-handle enameled green or red
T-handle removable with valve in service
WARNING: do not exceed reasonable temperature and/or electrical load

Blowout-proof nickel plated brass stem
Maintenance-free, double EPDM O-rings at the stem for maximum safety

40 bar (600 PSI) non-shock cold working pressure
DIN-EN 13828 limitations for potable water: 10 bar (Kg/cm²) non-shock cold working pressure and +65°C temperature (occasional excursions up to 90°C are permitted for a period of 1 h maximum)
-40°C to +150°C (-40°F to +302°F)
WARNING: freezing of the fluid in the installation may severely damage the valve

Pure PTFE self-lubricating seats with flexible-lip design

Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
Patented locking device
EN10226-1 parallel female by female threads and taper male by parallel female threads (s.84W model)
Stubby handle
RuB memory stop designed to be installed with our stubby handle

EN 10226-1, ISO228 parallel female by ISO228 male threads

Stem extension
Stainless steel ball (1.4401 / AISI 316)
Glass filled PTFE seals
Custom design

The product meets the requirements of PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking

DVGW (Germany)
GOST-R (Russia)
EAC – Declaration of conformity (Russia, Kazakhstan, Belarus)
RoHS Compliant (EU)
Attestation de Conformité Sanitaire (France)

NOTE: approvals apply to specific configurations/sizes only

Part description	Quantity	Part Material
Nickel plated body (external nickel plated, unplated inside)	1	CW617N
Seat	2	PTFE
Chrome plated ball with rinse hole	1	CW617N
Nickel plated male end-cap (external nickel plated, unplated inside)	1	CW617N
Nickel plated stem O-ring design	1	CW617N
Geomet® nut	1	CB4FF (EN10263-2)
O-Ring	2	EPDM
Green or red T-handle	1	EN AC-46100