• 24h 100% seal test guaranteed
• Dual sealing system allows valve to be operated in either direction making installation easier
• No metal-to-metal moving parts
• No maintenance ever required
• Handle clearly shows ball position
• Silicone-free lubricant on all seals
• Chrome plated brass ball for longer life
• Handle stops on body to avoid stress at stem

• Hot forged sand blasted, external nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
• Finest brass according to EN 12165 and EN 12164 specifications

• Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
• WARNING: do not exceed reasonable temperature and/or electrical load

• Blowout-proof nickel plated brass stem
• Maintenance- free, double FPM O-rings at the stem for maximum safety

• 40 bar (600 PSI) up to 2″, 30 bar (450 PSI) over 2″ non-shock cold working pressure
• -40°C to +170°C (-40° to +350°F)
• For use with dangerous fluids temperature rating is -20°C +60°C and pressure rating is 5 bar
• AS4617 Limitation for GAS: 2100 Kpa up to 2″ and 1500 Kpa from 2.1/2″ to 4″ rated working pressure and 0°C/ +60°C temperature
• WARNING: freezing of the fluid in the installation may severely damage the valve

• Pure PTFE self-lubricating seats with flexible-lip design

• Stem extension
• T-handle (for sizes 1/4" through 1 1/4")
• Oval lockable handle up to 2″, round over 2″
• Stainless steel handle  1.4016/AISI 430
• Patented locking device for valves up to 4″
• Female by female threads
• Stubby handle
• RuB memory stop designed to be installed with our stubby handle

• EN10226-2, ISO 7/1, BS 21 BSPT taper male by female threads

• Full port to DIN 3357 for maximum flow

• Stainless steel ball 1.4401/AISI 316
• Glass filled PTFE seals
• Custom design

• Assessment according to Pressure Equipment Directive 2014/68/UE module B+D by ICIM  (0425)

• The Australian Gas Association (Australia)
• Factory Mutual (United States)
• BSI Group (United Kingdom)
• RoHS Compliant (EU)
• EAC – Declaration of conformity (Russia, Kazakhstan, Belarus)

NOTE: approvals apply to specific configurations/sizes only.