Document
Permetti download anche all'utente anonimo
Off
Request info

Technical Info

  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Chrome plated brass ball for longer life
  • Handle stops on body to avoid stress at stem
  • Full port to DIN 3357 for maximum flow
  • Hot forged sand blasted, external nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Finest brass according to EN 12165 and EN 12164 specifications
  • Double side drain allows easy and safe downstream line venting
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • Handle removable with valve in service
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • Blowout-proof nickel plated brass stem
  • Maintenance-free, double FPM O-rings at the stem for maximum safety
  • 16 bar (230 PSI) non-shock cold working pressure
  • Pressure applicable to valve, not to side tap
  • -20°C to +170°C (-4°F to +350°F)
  • Temperature applicable to valve, not to side tap
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • Pure PTFE self-lubricating seats with flexible-lip design
  • Stem extension
  • T-handle
  • Oval lockable handle
  • Stainless steel handle (1.4016 / AISI 430)
  • Patented locking device
  • Compact drain
  • Stubby handle
  • RuB memory stop designed to be installed with our stubby handle
  • ISO 228 parallel female by female threads
  • G 1/4″ ISO 228 drain on both side
  • Stainless steel ball (1.4401 / AISI 316)
  • Glass filled PTFE seals
  • Custom design
  • Male by female threads
  • The product described in this document meets the requirements of PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking; it cannot be used with dangerous gases in sizes larger than 25mm
  • EAC – Declaration of conformity (Russia, Kazakhstan, Belarus)
  • RoHS Compliant (EU)
  • GOST R (Russia)

NOTE: approvals apply to specific configurations/sizes only.

1.1/4”- 2” hollow ball

Part description Quantity Part Material
Nickel plated body (external treatment)
1
CW617N
Seat
2
PTFE
Chrome plated ball
1
CW617N
Nickel plated end-cap (external treatment)
1
CW617N
Nickel plated stem O-ring design
1
CW617N
Geomet® nut
1
CB4FF (EN10263-2)
O-Ring
2
FPM
Red PVC coated Geomet® steel handle
1
DD11 (EN10111)
Nickel plated cap
1
CW617N
O-Ring
2
EPDM

DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4.

Pressure-temperature chart
Pressure drop chart

Technical material

Document
Document
Permetti download anche all'utente anonimo
Off

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.

XCES81
-
4266

To view all available technical material
Register as a client