• 24h 100% seal test guaranteed
• Dual sealing system allows valve to be operated in either direction making installation easier
• No metal-to-metal moving parts
• No maintenance ever required
• Handle clearly shows ball position
• Silicone-free lubricant on all seals
• Handle stops on body to avoid stress at stem
• Chrome plated brass ball for longer life

• Standard port for compact design

• Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
• Finest brass according to EN 12165 and EN 12164 specifications

• Aluminum wedge handle enameled red
• Handle removable with valve in service
• WARNING: do not exceed reasonable temperature and/or electrical load

• Blowout-proof nickel plated brass stem
• Maintenance-free, double FPM O-rings at the stem for maximum safety

• 450 PSI (30 bar)  non-shock cold working pressure
• 250 PSI (17 bar) non-shock working pressure for LP-Gas
• -40°F to +350°F (-40°C to +170°C)
• WARNING: freezing of the fluid in the installation may severely damage the valve

• Pure PTFE self-lubricating seats with flexible-lip design

• Stem extension
• T-handle
• Stainless steel handle (1.4016 / AISI 430)
• 3/8″ through 1″ NPT female by NPT female (suffix 41)
• 3/8″, 1/2″ and 5/8″ flare by flare (suffix 30)
• 1/2″ NPT  female by 1/2″ flare (suffix 31)
• 1/2″ NPT male by 1/2″ flare (suffix 34)
• 1/2″ NPT male by 3/8″ flare (suffix 34)
• 1/2″ NPT female by 3/8″ flare (suffix 33)
• 1/2″ flare by 3/8″ flare (suffix 32)
• 1/8″ NPT side tap for some versions/sizes

• NPT taper ANSI B.1.20.1 female by female threads

• Canadian standards Association (United States, Canada)
• GOST-R (Russia)
• RoHS Complaint (Russia)
• Underwriters Laboratories (United States, Canada) – Guide YSDT: LP-Gas shut-off valve – Guide YRBX: Flammable liquid shut-off valve – Guide YRPV: Gas shut-off valve for use with natural and manufactured gases – Guide MHKZ: No. 6 oil at 250°F
• Meeting WW-V-35C Federal U.S. Specification (United States)

NOTE: approvals apply to specific configurations/sizes only.